Facility Glimpse
EMC LAB
EMC lab at ICAT is state-of-the-art facility which can cater to the automotive as well as non –automotive requirements. There are 02 anechoic chambers with adequate instrumentation to support the EMC test requirements: Pre-compliance as well as Compliance tests for electrical/electronic subassemblies, all Vehicles Categories (2W, 3W, 4W, Buses, Trucks, E-rickshaw, E-Cart, Tractors, Trailers, etc.), including Conventional Fuel Vehicles, Electric Vehicles, Hybrid Vehicles, Heavy Commercial Vehicles, Agricultural Vehicles, Unmanned Aerial Vehicles, Construction Equipment Vehicles, other devices related to Gensets, Information Technology, Household, Multimedia, Medical, Industrial, Railway, Defence, Drone, Lighting, Electric Vehicle Supply Equipment (EVSE), Consumer electronics, Wireless devices, Telecomm devices, Radio Equipment, etc. ICAT’s EMC lab is among the best maintained and managed EMC testing labs in the country and is accredited as per ISO 17025 by National Accreditation Board for Testing and Calibration Laboratories (NABL) and American Association for Laboratory Accreditation (A2LA) including FDA Approvals. We also support with E-Marking, RED NB Certificate, CE Marking, Multi-country Approvals, ICASA Certification, WPC ETA, MTCTE/TEC Certification, etc.
Capabilities
-
- Radiated and Conducted emissions as per various CISPR standards.
- Road Vehicles as per ISO 11451/SAE J1113/AIS 004-3/ECE Regulation No. 10.
- Road Vehicle Components as per ISO 11452/SAE J1113/AIS 004-3/ECE Regulation No. 10.
- Immunity to conducted transient’s disturbances, as per ISO 7637-2/ISO 7637-3 (CCC and DCC).
- Immunity to Electrostatic Discharge (ESD) as per ISO 10605/IEC 61000-4-2.
- Radiated Immunity as per IEC 61000-4-3.
- Immunity to Fast transients as per IEC 61000-4-4.
- Immunity to surges as per IEC 61000-4-5.
- Immunity to Conducted disturbance induced by radio frequency fields as per IEC 61000-4-6.
- Immunity to radiated magnetic fields as per IEC 61000-4-8/IEC 61000-4-9.
- Immunity to voltage dips & short interruptions as per IEC 61000-4-11/IEC 61000-4-29/IEC 61000-4-34.
- Harmonics and Inter harmonics, low frequency immunity as per IEC 61000-4-13.
- Voltage fluctuation immunity as per IEC 61000-4-14.
- Ripple on DC input power port immunity as per IEC 61000-4-17.
- Variation of power frequency immunity as per IEC 61000-4-28.
- Low frequency conducted disturbances and signaling as per IEC 61000-2-2.
- Harmonic Current Emissions as per IEC 61000-3-2/IEC 61000-3-12.
- Voltage Fluctuations and Flicker as per IEC 61000-3-3/IEC 61000-3-11.
- Electric Vehicle Charging Stations as per AIS 138/IEC 61851.
- Medical Devices as per IEC 60601-1-2.
- Defence related devices as per MIL 461.
- Radio Equipment as per EN 301 489.
- Earth-moving and building construction machinery as per ISO 13766.
- Agricultural Tractors as per AIS 168/ISO 14982.
- Drones as per QCI requirement.
Detailed Facility Update
-
- Component Semi – Anechoic Chamber (CSAC) with Overall Dimensions: 8.5 m X 7 m X 6 m (L X W X H), dedicated shielded control room with advanced instrumentation. CSAC has a table top setup and 2W dyno, Testing Capability up to 18 GHz, Test distances: 1m, 3m
- Vehicle Semi – Anechoic Chamber (VSAC) with Overall Dimensions: 30 m X 20 m X 10 m (L X W X H), dedicated shielded control room with advanced instrumentation. VSAC has 11 m turntable, 4X4 chassis dynamometer with advanced electronic control system functions, for a device up to 19 tons. Maximum achievable speed on chassis dynamometer – 120 kmph, Testing Capability up to 18 GHz, Test distances: 1m, 3m and 10m
- Shielded Enclosure for Conducted RF Immunity, Bulk Current Injection, TEM Cell and Conducted Emissions
- General Instrumentation 1: Conducted Transient Immunity, Conducted Transient Emission, Magnetic Immunity and Electrostatic Discharge Testing.
- General Instrumentation 2: Surge, Burst, EFT, Harmonics, Flickers, Voltage Dips, Voltage Variations, Ripple, Frequency variations, Magnetic Immunity, Electrostatic Discharge Testing.